|Availability:||Out of stock|
|Delivery time:||Coming soon|
Rapax handmade springs - made in Europe to give you the best and most silent results for your sniper such as SRS/VSR/SSG24.
Confirmed results of reaching 2+ Joule with a standard SRS. FPS may vary depending on the setup used on SRS, SSG24 or VSR-10.
Results : 2+ spring gives between 2.2J (G-Spec) to 2.6J for longest SRS barrels.
If the Rapax spring shoots too hot for your field, you can cut some coils without damging the spring integrity as long as it is done properly.
The first thing you will notice is a lighter pull compared to standard springs, in short: less effort for more joule. The Silverback M140 and Rapax 2+J spring need similar pull strength but the Rapax 2+J spring gives more FPS/joule in comparison.
All springs are the same length, use the same material, have the same number of coils, ect.
Spring wire used for Rapax springs production is of the highest quality spring wire, ensuring a prolonged period of usage compared to other springs.
Tempering of these springs is made in a way to guarantee a long lifetime and very small FPS/Joule loss over time.
Springs are made in tight tolerances regarding diameter, they prevent the "twang" sound in airsoft sniper replicas.
Unfortunately due to covid I haven't had time to test the spring,but if it is anything like all the other products that I have ordered from skirmshop it will be awesome.
Easy to pull and just the exact joules I want. Recommended
No description was given
Easier bolt pull than a SBA M150, power output in a 20" sport is equal to if not 1-5fps more than an M150. Slightly more variance but its not bedded in yet.
Good quality spring made bolt pull smoother
Excellent bit of kit with slightly lighter bolt pull.
Nice easy pull. Just over the two joule mark. FPS the same as my standard spring. Happy days.
Marginally easier to pull than the stock spring, and only just breaking the 2j limit with a weighted piston. Helped soften the noise from the spring/spring guide ive been having issues with though.
Initial setup and testing with the spring have gone well. Fitted into an SRS A1 in conjunction with a WASP piston it is proving to be a good step forward in the guns evolution.
Great product, smooth pull
Awesome quality spring. Getting 2.3J out of my SRS Sport. Great service once again.
Very long spring but it's much easier to pull. I would definitely recommend.
Absolutely brilliant. Worth every penny. As always, Sniper mechanic thanks for the advice.
Ok spring. Very nice and easy bolt pull but the joules are no where near 2J let alone over like is advertised with my sportline. I realise this is a recurring problem with people on the sniper forums and is probably down to bad quality control. Easy pull but bad joule results.
Good quality spring which gives an easier pull. Well worth the purchase
A must have upgrade for any UK srs users, higher joules then Silverback m150 and much easier bolt pull. Thank you to Milan Rapax and Skirmshop.