3L HopUp Chamber

The CowCow CCT 3L HopUp Chamber was constructed by aluminum 7075 with CNC machined. Its lightweight design and redesigned structure can provide extra support to the lower part of the chamber. 3 "L" design drives better accuracy and consistency with high durability and reliability which are a double lock system on the chamber and a lock on the hopup wheel. It can effectively hold the chamber to the frame tightly and lock the wheel in a preset position to prevent loosening. Also, it provides a detachable chamber pin used for guide rods (especially for 1911 Pistol). This is the best suitable for the ultimate user to optimize the chamber setting and maintain stability.

It is suitable for use with Tokyo Marui 1911, and Hi-Capa 4.3/5.1 pistols, and also both plastic/metal slides.

Highlighted features

• Aluminum 7075 material with CNC machined
• Ultra lightweight design
• Enhancing accuracy and consistency with high durability and reliability
• Redesigned structure to provide extra support to the lower part of the chamber
• A double lock system can lock your chamber on the frame tightly
• Extra lock place on the hop-up wheel to lock the wheel on preset position and prevent loosen.
• Able for an ultimate user to optimize setting and maintain stability
• Detachable chamber pin used for guide rod especially for 1911 Pistol

Attention & Installation Guide:
Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used.