T1P Air Tank Empty (48CI/0.8 Litre) - Rho and Pi Marked

APPLICABLE TO ANY AIRSOFT REGULATOR USED WITH ANY HPA TANK 

When fitting a secondary regulator (e.g. Wolverine Storm Cat5, Airtac AT200, Balystik HPR800C) to a HPA tank, do not overtighten the secondary regulator. Fit the secondary regulator to the HPA tank when the tank is full. Tighten the regulator until it pressurises, or stops freely rotating. You do not need to use force to achieve a seal. 

If your secondary regulator 'binds' with your HPA bottle (due to over torquing of the secondary regulator, dirt etc) have the bottle emptied by a professional, or use a tank emptying tool. Grip the primary regulator of the bottle by the bonnets wrench flats, and then unscrew the secondary regulator from your tank. This is to avoid applying excess torque to your primary regulator, and to avoid unscrewing the primary regulator while pressurised.

3000PSI/200 BAR/48CI

All tanks are shipped empty, this is standard for all pressure bearing equipment sold on the website.

A different brand of HPA tank may be shipped, the capacity will still be the exact same, as will the form and function. The tank will be from another reputable source, such as Dye, Combat Games Essentials, or HK Army

FILLING THE CYLINDER: Improper filling of this cylinder could result in death, personal injury or property damage. This cylinder should only be filled by properly trained personnel. Do not exceed the cylinders marked capacity.

USING THE CYLINDER: This cylinder is intended for Airsoft/Paintball use only. Keep cylinder out of reach of children.
Do not remove or cover the label.
Improper storage of this cylinder can result in death, serious injury or property damage.
Cylinders exposed to a fire or heated temperatures in excess of 250F/121C should be condemned.
Do not expose this cylinder to corrosive materials and do not clean with caustic cleaners or strippers. 

DANGER: High pressurised air is extremely dangerous. A pressurised cylinder has enough force to kill if misused. Valves must be installed or removed only by qualified personnel.

WARNING: Cylinder is an explosion hazard. This cylinder must not be altered in any way. 

This cylinder must be retested by a qualified retester 5 years after the date of production.

ALWAYS :

• Keep the thread and inside of your tank away from oil, dirt or other contaminants.
• Make sure your tank has not passed the re-test date (5 years from date of manufacture, which is stamped on the neck of the bottle)
• Keep the outside of your bottle clean. Use only a damp cloth to clean.
• Store in a dry, cool and adequately ventilated place.
• Have your bottle serviced by a qualified individual/company.
• Make sure all accessories in the bottle are serviced, reviewed, inspected and handled in strict accordance with the manufacturer's instructions.
• Condemn the cylinder if it shows signs of corrosion, holes or dents, if it has been damaged by heat, a fall, or other. Some may say you can retest the cylinder if dented / corroded, I would always just condemn it.
• In the event that a leak is detected, the tank must not be refilled under any circumstances.