VSR/GBB Flamingo Bucking 50 Degree

The new Flamingo VSR/GBB bucking from SniperMechanic. Improved contact patch, placement and materials.

Blue sticker = 50 Degree

This bucking will fit any rifles/pistols that use the VSR/GBB style bucking.

This bucking was a long time project in the making, one of the earliest but most challenging. However it's here and it's unique design and material offers great shot to shot consistency and a very flat flight path.

What makes the Flamingo bucking unique, more so than it's design is the material itself, while I won't go into the details of the exact material I can list some of the properties below:

• Tough
• Abrasive resistant
• Tear resistant. The tear-strength ranges between 500-100 Ibs / linear inch, which is far superior to rubbers.
• Excellent elastic memory
• Temperature resistant - At cold temperatures, it will remain flexible down to -68°C (-90°F).
• Weather resistant -to oxygen, ozone, sunlight and general weather conditions.

This is designed for GBB/VSR cut barrels (ideally unbridged), however some bridged barrels work.

Compatibility:

• Maple Leaf Crazy Jets - Suitable
• Maple Leaf 6.02 Series - Suitable
• TNT Barrels - Suitable
  LayLax - Suitable
• Action Army - Suitable
• PDI (Genuine ones) - Suitable, but very tight and need he use of an Omega nub due to tiny window
• PDI Clone style barrels - Untested
• EdGi - Varies, some hop windows were suitable during testing, others were not as the window was shallow.
• Lambda - Suitable for the open cut window
• Other Barrels - Untested

Install tips:

• PTFE the barrel under where the rear of the rubber goes and then over it once installed.
• For best results use on a barrel with a large window
• Use a suitable concave nub in rifles, such as T-nub, Omega Nub, Bridge nub, H nub. Avoid using Panthera/Skee nubs
• For pistols, the standard V shape arm gives great accuracy, but for the best range use a Hadron H Plate or Maple Leaf Key